PATC Performance Torque Converters
#5R. Torque converter Fits 2005 up 4 Liter V6 Mustangs with the 5R55S transmission.
We have triple clutch converters for the Ford Power Stroke Diesel, Allison 1000 and Dodge Cummins Diesel. Check out our billet torque converters for 700R4, 4L60E, LS1, 200-4R, 4L80E, 6L80E, TH400, 4R70W, 4R100 and 48RE transmissions. We have developed a full line of billet torque converters with lock-up for General Motors, Ford, and Dodge transmissions for applications ranging from improved factory performance to all out competition.
We can also build custom stall speed converters as well if the one you need is not listed. Email Kerry@torqueconvertershop.com
ALL OUR TORQUE CONVERTERS ARE
MADE IN THE U.S.A.
Torque converter for Allison 700R4 4L60E 2004R TH350 TH400 4L80E 6L80E
Torque converter for C4 C6 AOD 4R70W 4R100
Torque Converter for 727 904 518 46RH 46RE 618 47RH 47RE 48RE 545RFE 68RFE
Dodge Cummins Conversion swap Torque Converters
Dodge Cummins Torque Converters
#5R. Torque converter Fits 2005 up 4 Liter V6 Mustangs with the 5R55S transmission. This converter will stall at 3000 RPM and has all bearing construction, furnace brazed fins plus a carbon fiber clutch lining. No trade-in on this one. In the past you had to send your torque converter in to be redone, no more. Be one of the first to own this hot V6 stall converter. You'll feel a big difference on the first take off. This torque converter comes with a new OEM pre-drilled flexplate as a two piece set. This torque converter will lower your 60 foot time .2 seconds and the 1/4 mile time by .5 seconds. The competitions 3000 stall speed converter was tested in the 1/4 mile then removed, and a PATC 3000 stall speed converter was installed and tested, resulting in a .2 second lower time in the 1/4 mile. This was due to the PATC converter being a smaller diameter than stock. No down time, keep your old stock converter. No core charge. Can be special ordered in stall speeds of 2000 to 3500. Dollar for dollar this converter will do more for your time than any other part. Cost $499.00
If you have question please email Kerry@torqueconvertershop.com
Also check out our other site for Manual transmission parts, LT1 and LS1 type fuel rail covers, flywheels, Cummings flexplates, and more. www.americanhotrodsolutions.com www.manualtransmissionkits.com
Go to www.626pucks.com for CB and Ham antenna mounts and accessories